Nanostructured functionalized magnetic platforms for the sustained delivery of cisplatin: Synthesis, characterization and in vitro cytotoxicity evaluation.

Cisplatin has demonstrated extraordinary anticancer activity against a variety of solid tumors. However, its clinical efficacy is contrasted by its toxicity profile. Having in mind the need to reduce the toxicity, promote a sustained release and enhance the body-circulation time of cisplatin, herein novel nanocarriers consisting of core-shell silica-coated iron oxide nanoparticles functionalized with dicarboxylic acid groups were prepared and characterized. Cisplatin was conjugated with the functionalized nanoparticles by surface tethering. Controlled release of cisplatin was observed without burst effect and in a sustained profile for up to 3 days. In vitro studies showed cytotoxic and antiproliferative effects of the cisplatin nanoconjugates against a human pancreatic cancer cell line. Importantly, when compared with free cisplatin, nanoconjugates exhibited lower cytotoxic effects regarding nonmalignant human duct pancreatic cells.

The influence of Citrate or PEG coating on silver nanoparticle toxicity to a human keratinocyte cell line.

Surface coating of silver nanoparticles may influence their toxicity, in a way yet to decipher. In this study, human keratinocytes (HaCaT cells) were exposed for 24 and 48h to well-characterized 30nm AgNPs coated either with citrate (Cit30 AgNPs) or with poly(ethylene glycol) (PEG30 AgNPs), and assessed for cell viability, reactive oxygen species (ROS), cytokine release, apoptosis and cell cycle dynamics. The results showed that Cit30 AgNPs and PEG30 AgNPs decreased cell proliferation and viability, the former being more cytotoxic. The coating molecules per se were not cytotoxic. Moreover, Ag(+) release and ROS production were similar for both AgNP types. Cit30 AgNPs clearly induced apoptotic death, while cells exposed to PEG30 AgNPs appeared to be at an earlier phase of apoptosis, supported by changes in BAX, BCL2 and CASP-3 expressions. Concerning the impact on cell cycle dynamics, both Cit30 and PEG30 AgNPs affected cell cycle regulation of HaCaT cells, but, again, citrate-coating induced more drastic effects, showing earlier downregulation of cyclin B1 gene and cellular arrest at the G2 phase. Overall, this study has shown that the surface coating of AgNPs influences their toxicity by differently regulating cell-cycle and cell death mechanisms.

Silver-gelatine bionanocomposites for qualitative detection of a pesticide by SERS.

The controlled release of pesticides using hydrogel vehicles is an important procedure to limit the amount of these compounds in the environment, providing an effective way for crop protection. A key-step in the formulation of new materials for these purposes encompasses the monitoring of available pesticides in the gel matrix under variable working conditions. In this work, we report a series of bionanocomposites made of Ag nanoparticles (NPs) and gelatine A for the surface enhanced Raman scattering (SERS) detection of sodium diethyldithiocarbamate (EtDTC) as a pesticide model. These studies demonstrate the effectiveness of these substrates for the detection of EtDTC in aqueous solutions in a concentration as low as 10(-5) M. We have monitored the Raman signal enhancement of this analyte in bionanocomposites having an increasing amount of gelatine due to their relevance in formulating hydrogels of variable gel strengths. Under these conditions, the bionanocomposites have shown an effective SERS activity using EtDTC, demonstrating their effectiveness in the qualitative detection of this analyte. Finally, experiments involving the release of EtDTC from Ag/gelatine samples have been monitored by SERS, which attest the potential of this spectroscopic method in the laboratorial monitoring of hydrogels for pesticide release.

Core-shell magnetite-silica dithiocarbamate-derivatised particles achieve the Water Framework Directive quality criteria for mercury in surface waters.

The sorption capacity of nanoporous titanosilicate Engelhard titanosilicate number 4 (ETS-4) and silica-coated magnetite particles derivatised with dithiocarbamate groups towards Hg(II) was evaluated and compared in spiked ultra-pure and spiked surface-river water, for different batch factors. In the former, and using a batch factor of 100 m(3)/kg and an initial Hg(II) concentrations matching the maximum allowed concentration in an effluent discharge, both materials achieve Hg(II) uptake efficiencies in excess of 99 % and a residual metal concentration lower than the guideline value for drinking water quality. For the surface-river water and the same initial concentration, the Hg(II) uptake efficiency of magnetite particles is outstanding, achieving the quality criteria established by the Water Framework Directive (concerning Hg concentration in surface waters) using a batch factor of 50 m(3)/kg, while the efficiency of ETS-4 is significantly inferior. The dissimilar sorbents' Hg(II) removal efficiency is attributed to different uptake mechanisms. This study also highlights the importance of assessing the effective capacity of the sorbents under realistic conditions in order to achieve trustable results.

Removal of mercury (II) by dithiocarbamate surface functionalized magnetite particles: application to synthetic and natural spiked waters.

In order to take advantage of the high affinity between mercury and sulphur, magnetite (Fe(3)O(4)) particles functionalized with dithiocarbamate groups (CS(2)(-)), were synthesized to be used as a new type of sorbent to remove Hg (II) from synthetic and natural spiked waters. The effectiveness of this type of sorbent was studied, and its potential as cleanup agent for contaminated waters was assessed. Batch stirred tank experiments were carried out by contacting a volume of solution with known amounts of functionalized Fe(3)O(4) particles, in order to study the effect of sorbent dose, salinity, and the kinetics and the equilibrium of this unit operation. A complete Hg (II) removal (ca. 99.8%) was attained with 6 mg/L of magnetic particles for an initial metal concentration of 50 µg/L. It was confirmed that highly complex matrices, such as seawater (ca. 99%) and river water (ca. 97%), do not affect the removal capacity of the functionalized magnetic particles. Concerning isotherms, no significant differences were observed between two- and three-parameter models (P = 0.05%); however, Sips isotherm provided the lowest values of SS and S(x/y), predicting a maximum sorption capacity of 206 mg/g, in the range of experimental conditions under study. The solid loadings measured in this essay surmount the majority of the values found in literature for other type of sorbents.

Tailoring the morphology of high molecular weight PLLA scaffolds through bioglass addition.

Thermally induced phase separation (TIPS) has proven to be a suitable method for the preparation of porous structures for tissue engineering applications, and particular attention has been paid to increasing the pore size without the use of possible toxic surfactants. Within this context, an alternative method to control the porosity of polymeric scaffolds via the combination with a bioglass is proposed in this work. The addition of a bioactive glass from the 3CaO x P2O5-MgO-SiO2 system enables the porous structure of high molecular weight poly(l-lactic) acid (PLLA) scaffolds prepared by TIPS to be tailored. Bioglass acts as a nucleating catalyst agent of the PLLA matrix, promoting its crystallization, and the glass solubility controls the pore size. A significant increase in the pore size is observed as the bioglass content increases and scaffolds with large pore size (approximately 150 microm) can be prepared. In addition, the bioactive character of the scaffolds is proved by in vitro tests in synthetic plasma. The importance of this approach resides on the combination of the ability to tailor the porosity of polymeric scaffolds via the tunable solubility of bioglasses, without the use of toxic surfactants, leading to a composite structure with suitable properties for bone tissue engineering applications.

Rheological behavior of thermoreversible kappa-carrageenan/nanosilica gels.

The rheological behavior of silica/kappa-carrageenan nanocomposites has been investigated as a function of silica particle size and load. The addition of silica nanoparticles was observed to invariably impair the gelation process, as viewed by the reduction of gel strength and decrease of gelation and melting temperatures. This weakening effect is seen, for the lowest particle size, to become slightly more marked as silica concentration (or load) is increased and at the lowest load as particle size is increased. These results suggest that, under these conditions, the particles act as physical barriers to polysaccharide chain aggregation and, hence, gelation. However, for larger particle sizes and higher loads, gel strength does not weaken with size or concentration but, rather, becomes relatively stronger for intermediate particles sizes, or remains unchanged for the largest particles, as a function of load. This indicates that larger particles in higher number do not seem to increasingly disrupt the gel, as expected, but rather promote the formation of stable gel network of intermediate strength. The possibility of this being caused by the larger negative surface charge found for the larger particles is discussed. This may impede further approximation of neighboring particles thus leaving enough inter-particle space for gel formation, taking advantage of a high local polysaccharide concentration due to the higher total space occupied by large particles at higher loads.